Home
SAZL

Bridge Design Book List


Bridge Design Books
Bridge Design Books
Bridge Design Books
Bridge Design Books

Bridge Design Books


Record 281 to 320
First Page Previous Page Next Page Last Page
Mohsen, J. P. (1995). Computing in civil engineering: proceedings of the Second Congress held in conjunction with A/E/C Systems '95, Atlanta, GA. 1995. New York, American Society of Civil Engineers.

Møller, I. (1986). To bridge _ the Danish way. [København], Danish State Railways.

Morgenthal, G. (2000). Fluid-structure interaction in bluff-body aerodynamics and long-span bridge design: phenomena and methods, University of Cambridge, Department of Engineering.

Mufti, A. A. E., B. E. Bakht, et al. (1994). Developments in short and medium span bridge engineering '94: 4th International conference on short and medium span bridges: Papers. Montreal, Canada, CSCE.

Murray, P., M. Stevens, et al. (1996). Living bridges: the inhabited bridge, past, present and future. New York, Prestel.

Muscati, S. A. H. A. (1986). A theoretical study of the fatigue cumulative damage analysis of reinforced concrete beams as a contribution to the design of short span highway bridges in regions where traffic is not intense, University of Southampton.

Nardon, J. D. (1995). Bridge and structure estimating. New York; London, McGraw-Hill.

Nash, G. F. J. (1984). Steel bridge design guide: composite universal beam simply supported span. Croydon, Constrado.

National Committee for Bridge and Structural Engineering. Annual, S. (1955). [Proceedings - Annual Symposium. National Committee for Bridge and Structural Engineering]. Tokyo, Japan Society for the Promotion of Science.

National Research Council. Committee on Ship-Bridge Simulation, T. (1996). Simulated voyages: using simulation technology to train and license mariners. Washington, D.C., National Academy Press.

National Rivers Authority. Wessex, R. (1992). Flood defences development control: summary of requirements for bridges, National Rivers Authority, Wessex Region.

Natural Sciences and Engineering Research Council, C. (1985). A Second five-year plan for the programs of the Natural Sciences and Engineering Research Council: completing the bridge to the 90's. Ottawa, Ont., Natural Sciences and Engineering Research Council of Canada.

Neill, C. R. (2004). Guide to bridge hydraulics. London, Thomas Telford.

Newmark, N. M. a. S. and C. P. Siess (1955). Research on Highway Bridge Floors at the University of Illinois, 1936-1954. (Reprinted from Proceedings of the Thirty-third Annual Meeting of the Highway Research Board.), Urbana.

Newport, M. C. o. A. S. o. G. D. (1966). Lifeline: a graphic record of the Severn Crossing including an historical survey, the structure of the new suspension bridge and its effect on the community, Newport: Screwpacket Press.

Ng, C. W. W. (1995). Measurement of small strains using semiconductors in centrifuge tests, University of Cambridge, Department of Engineering.

Nicholson, B. A. (1997). Simple bridge design using prestressed beams: an introduction to the design of simply-supported bridge decks using prestressed concrete bridge beams. Leicester, Prestressed Concrete Association.

Nieto Ramirez, J. A. a. V. and A. S. Veletsos (1964). Response of Three-Span Continuous Highway Bridges to Moving Vehicles. A report of the highway bridge impact investigation, pp. iv. 221. University of Illinois: Urbana.

Nishikawa, K. E. (1997). Proceedings of the 13th U.S.-Japan bridge engineering workshop, PWRI.

O'Brien, E. J., D. L. Keogh, et al. (1999). Bridge deck analysis. London, E & FN Spon.

O'Connor, C. (1971). Design of bridge superstructures. New York; London, Wiley-Interscience.

O'Connor, C. and P. A. Shaw (2000). Bridge loads: an international perspective. London, Spon Press.

Ogle, M. H. (1982). Residual stress in a steel box girder bridge. London, Construction Industry Research and Information Association.

Ohrachteirn, P. (1982). Lateral torsional buckling tests on reduced scale welded stell bridge gir girders. report no 1, Results and evaluation of tests, University of Sheffield, Department of Civil and Structural Engineering.

Olson, R. M. (1974). Bridge rail design: factors, trends, and guidelines. Washington, Transportation Research Board, National Research Council.

O'Shea, M. D. and R. Q. Bridge (1997). Behaviour of thin-walled box sections with lateral restraint. Sydney, University of Sydney, Department of Civil Engineering, Centre for Advanced Structural Engineering.

O'Shea, M. D. and R. Q. Bridge (1997). Design of thin-walled concrete filled steel tubes. Sydney, University of Sydney, Department of Civil Engineering, Centre for Geotechnical Research.

O'Shea, M. D. and R. Q. Bridge (1997). Local buckling of thin-walled circular steel sections with or without internal restraint. [Sydney], University of Sydney, Department of Civil Engineering.

O'Shea, M. D. and R. Q. Bridge (1997). Tests on circular thin-walled steel tubes filled with medium and high strength concrete. Sydney, University of Sydney, Department of Civil Engineering.

O'Shea, M. D. and R. Q. Bridge (1997). Tests on circular thin-walled steel tubes filled with very high strength concrete. Sydney, University of Sydney, Department of Civil Engineering.

Parsons, G. D. W. (1952). Callender-Hamilton Bridge Handbook. Highway bridges type 'B.' [With plates.], pp. 151. British Insulated Callender's Construction Co.: London.

Paulay, T. (1981). Lapped splices in bridge piers in columns of earthquake resisting reinforced concrete frames, Department of Civil Engineering, University of Canterbury.

Pearce, M. and R. Jobson (2002). Bridge builders. Chichester, Wiley-Academy.

Pennells, E. (1978). Concrete bridge designers manual. London, Cement and Concrete Association.

Phillips, P. (1887). The North bridge in its various stages of construction and compared with the most notable bridges of the world. Edinburgh, [s.n.].

Phillips, P. (1890). The Forth bridge in its various stages of construction, and compared with the most notable bridges of the world. Edin., R. Grant & son.

Phillips, P. E. (1890). [The Forth Bridge in its various stages of construction, and compared with the most notable bridges of the world. [Illustrated.]], Edinburgh: R. Grant & Son.

Philpot, H. P. (1939). Lattice Girder Bridge. With. plates, pp. viii. 223. Longmans & Co.: London.

Philpot, H. P. (1939). Lattice girder bridge. [S.l.], Longmans.

Pietrzykowski, J. (1981). Polymer-Concrete Composites, International Association for Bridge and Structural Engineering.


First Page Previous Page Next Page Last Page



Sitemap
Link | Link | Link | Link | Link | Link | Link | Link


powered by FreeFind


Last Modified: 11 March 2006
http://www.sazl.com