Bridge Design Book List
|
Bridge Design Book List |
|
|
|
|
||
|
|
||
|
|
| Plauk, G. E. (1982). Concrete structures under impact and impulsive loading: Interassociation symposium: Papers. Berlin, Bundesanstalt fu\0308r Materialpru\0308fung. |
| Pollalis, S. N. (1999). What is a bridge? the making of Calatrava's Bridge in Seville. Cambridge, Mass., MIT Press. |
| Pond, D. E. (1994). Tower Bridge: the enduring monument. London, Corporation of London. |
| Ponnuswamy, S. (1986). Bridge engineering. New Delhi, Tata McGraw-Hill. |
| Pritchard, B. (1992). Bridge design for economy and durability: concepts for new, strengthened and replacement bridges, T. Telford. |
| Pritchard, B. (1994). Continuous and integral bridges: proceedings of the Henderson Colloquium "Towards Joint-Free Bridges" organized by the British Group of the International Association for Bridge and Structural Engineering, Pembroke College, Cambridge, UK. 1993. London, Spon. |
| Pritchard, B. (1997). Bridge Modification 2: stronger and safer bridges: proceedings of the International Conference organized by the Institution of Civil Engineers and held in London on 7 November 1996. London, Thomas Telford. |
| Pritchard, B. E. (1994). Continuous and integral bridges: towards joint-free bridges: Colloquium: Papers. London, Spon. |
| Pulmano, V. A. (1981). Numerical Analysis of Continuous Helicoidal Girders. Zurich, International Association for Bridge and Structural Engineering. |
| Raggett, S. E. (1992). Bridge design for durability: expansion joints and continuity: Seminar: Papers, TRL. |
| Raina, V. K. (1990). Concrete bridge practice: analysis, design and economics, Tata McGraw-Hill. |
| Rajaraman, A. (1980). Nonlinear Analysis of Cable-Stayed Bridges, International Association for Bridge and Structural Engineering. |
| Randl, E. and R. P. Johnson (1982). Widths of initial cracks in concrete tension flanges of composite beams, International Association for Bridge and Structural Engineering. |
| Reed, B. (1981). The Humberside connection: how the bridge was built. Wallington, Home Publishing. |
| Reynolds, T. N. (2004). Timber bridges. London, BRE Bookshop. |
| Rickard, G. (1986). Bridges, Hove, Wayland. |
| Rockey, K. C. (1971). Developments in bridge design and construction. London, Crosby Lockwood. |
| Rockey, K. C. E., J. L. E. Bannister, et al. (1971). Developments in bridge design and construction: International conference: Papers, Crosby Lockwood. |
| Rose, R. J. (1962). Survey of Work in Compressed Air during the Construction of the Auckland Harbour Bridge, etc. [With illustrations.], pp. 108. Wellington. |
| Rosenberg, N. and W. G. Vincenti (1978). The Britannia Bridge: the generation and diffusion of technological knowledge. Cambridge, Mass.; London, M.I.T. Press. |
| Rosignoli, M. (2002). Bridge launching. London, Thomas Telford. |
| Rowe, R. E. (1962). Concrete Bridge Design. [With plates.], pp. 336. C. R. Books: London; John Wiley & Sons: New York. |
| Rowe, R. E. (1962). Concrete bridge design: [with] supplement Design curves. London, C.R. Books; New York: Wiley. |
| Russell, H. G. (2004). Concrete bridge deck performance: a synthesis of highway practice. Washington DC, Transportation Research Board. |
| Ryall, M. J., G. A. R. Parke, et al. (2000). The manual of bridge engineering. London, Thomas Telford. |
| Ryves, R. (1912). Preliminary Studies in Bridge Design. With numerous illustrations, etc, pp. viii. 57. St. Bride\2019s Press: London. |
| Schneider, J. r. (1997). Introduction to safety and reliability of structures. Zu\0308rich, International Association for Bridge and Structural Engineering. |
| Scott, Q. and H. S. Miller (1979). The Eads Bridge. Columbia; London, University of Missouri Press. |
| Scott, R. F. (2001). In the wake of Tacoma: suspension bridges and the quest for aerodynamic stability. Reston, Va., ASCE Press. |
| Sebastian, W. M. and R. E. McConnel (1995). Testing of a composite space truss bridge with GRP panels, University of Cambridge, Department of Engineering. |
| Sedlacek, G. (2001). Composite bridge design improvement for high-speed railways. Brussels, Directorate-General for Research. |
| Sedlacek, G. (2003). Composite bridge design for small and medium spans: final report. Luxembourg, Office for Official Publications of the European Communities. |
| Shahawy, M. and F. D. Hejl (2003). Prefabricated bridge elements and systems to limit traffic disruption during construction: a synthesis of highway practice. Washington, D.C., Transportation Research Board. |
| Shipway, J. S. (2002). Some aspects of the development of the girder bridge, 1820-1890. Edinburgh, Heriot-Watt University. |
| Siebke, H. (1982). Durable structures: Efforts of the German Federal Railway, International Association for Bridge and STructural Engineering. |
| Skinner, F. W. (1906). Types and details of bridge construction. [S.l.], McGraw Publishing Company. |
| Snowdon, R. A., M. L. Athorn, et al. (1988). Performance of a reinforced earth bridge abutment at Stirling. Crowthorne, Transport and Road Research Laboratory Ground Engineering Division. |
| Somerville, G. (1991). The Design life of structures: Colloquium: Workshop on the feasibility and practical application of design life principles to structures: Papers, Blackie Academic. |
| Springman, S. M. and M. D. Bolton (1990). The effect of surcharge loading adjacent to piles, Transport and Road Research Laboratory, Ground Engineering Division. |
| Springman, S. M., C. W. W. Ng, et al. (1994). Centrifuge and analytical studies of full height bridge abutment on piled foundation subjected to lateral loading, University of Cambridge, Department of Engineering. |